
Readings shared after each visit
After every visit you get a short written summary of what was found, what was done and what happens next. Move over the photo for an illustrative thermal view.
When your ice maker quits, Ice Maker Repair Naples FL gets it running again fast. We service Whirlpool, KitchenAid, GE, Samsung, LG, Sub-Zero, Scotsman, Manitowoc and Hoshizaki units across Collier County. Our trucks carry water inlet valves, control boards and ice maker molds, so most repairs finish in one visit. Call +12393129157 for appliance repair in naples.
Water line worth a closer lookValve area shows mineral buildupCondenser coil may need cleaning

We pull the machine, test the water inlet valve, thermostat and control board in sequence, then replace only the failed part. After the repair we run a full harvest cycle and check for leaks. You get a plain explanation of what failed and what we did.
IceTech Repair Experts handles Ice Maker Repair Naples FL for homes and businesses from Downtown to Vanderbilt Beach. We work on residential refrigerators, undercounter ice machines and commercial cubers. Our techs carry multimeters, manifold gauge sets and leak detectors to diagnose no-ice faults, leaks and error codes on the first visit. If your ice maker stopped overnight, we can usually see you the same day.
What sets us apart is preparation. We stock water inlet valves, thermostats, auger motors and control boards for the brands we see most, so we are not waiting on parts. We cover Old Naples, Park Shore, Pelican Bay, North Naples and East Naples. If you searched for appliance repair near me Naples FL, our dispatch team routes the closest truck. We also handle emergency ice maker repair Naples FL 24/7 when a commercial machine goes down.
From a dripping water line to a dead compressor, we cover the full range of ice maker problems in naples. Our techs are trained on Whirlpool, KitchenAid, GE, Samsung, LG, Sub-Zero, Scotsman, Manitowoc, Hoshizaki, Ice-O-Matic, Frigidaire and U-Line equipment.
Our core service covers no-ice faults, leaks, odd noises and error codes on residential and commercial units.
Standalone ice machines from Manitowoc, Scotsman and Hoshizaki need different diagnostics than refrigerator ice makers.
Restaurants, bars and hotels cannot afford a down cuber. We service high-volume machines, diagnose compressor and refrigerant issues, and carry EPA Section 608 practices on every job.
Home refrigerators from Whirlpool, GE, Samsung and LG make up most of our residential calls. Common fixes include clogged water lines, faulty inlet valves and worn auger motors.
When the ice maker inside your fridge stops, the cause is often a frozen fill tube or a bad thermostat.
Freezer-mounted ice makers deal with colder temps and more frost buildup. We inspect the mold, heater and sensor, then clear any ice blockage in the fill path.
We ask what happened, what needs attention and when you need us, then explain the next step.
Request ServiceWe are a local shop, not a call center. Our techs live in Collier County and know the water quality, humidity and seasonal demand that wear out ice makers here. That local knowledge means faster diagnosis and fewer return visits.

After every visit you get a short written summary of what was found, what was done and what happens next. Move over the photo for an illustrative thermal view.
We fit OEM components matched to your brand and model number, not universal parts that fail early.
Naples water is hard, so we check for scale and mineral buildup that shortens component life.
Call or write and we will ask about the brand, symptom and location.
+12393129157Every repair ends with a full harvest cycle so you see ice production working before we pack up.
Every ice maker job is estimated after we know the brand, the fault and the parts needed, because two machines with the same symptom can need different work.
We diagnose on site, explain what failed and give you a written estimate before any repair begins.
Request pricingWhat is the machine doing?
Usually a water line or inlet valve issue, often a quick fix.
How is the unit installed?
Easiest to pull out and service, shortest job time.
Are parts on the truck?
Valves, thermostats and boards we stock, so repair finishes same visit.
We keep the process simple. You call, we schedule a window, and a tech arrives with the tools and parts to diagnose your machine. Most repairs finish in one visit.

Tell us the brand, the symptom and your ZIP code. We route the closest tech and give you a realistic arrival window. If it is a commercial emergency, we prioritize it.

The tech tests the water inlet valve, thermostat, control board and sensors with a multimeter and manifold gauge set. You get a clear explanation of what failed and why.

We replace the faulty part with an OEM component, then run a full harvest cycle. We check for leaks, verify ice production and clean up before we leave.

If a part needs ordering, we schedule the return visit and keep you updated. Most follow-ups happen within two business days.
Naples water is hard, and the summer heat pushes ice makers hard. These are the faults we see most often, and how we fix them.
Nine times out of ten it is a clogged water line or a faulty water inlet valve. We test the valve solenoid, clear the line and confirm water flow before replacing anything.
Ice Maker Water Line RepairA cracked inlet valve, a loose fitting or a frozen fill tube that overflowed are the usual causes. We trace the leak, repair the line and dry-test the whole path. We also check the drain pump and bin for cracks.
Ice Maker Water Line RepairThat sound usually means an auger jam or a failing auger motor. We open the bin, clear the jam and test the motor under load. If it is drawing high amps, we replace it with an OEM part.
Ice Maker Not Making Ice RepairA faulty switch, a jammed auger or a frozen chute stops the dispenser. We diagnose the dispenser circuit, clear blockages and replace failed switches. Most dispenser repairs finish in one visit.
Ice Maker Dispenser RepairFlashing lights point to a sensor, control board or water flow issue. We pull the code, run the manufacturer diagnostic and test the indicated component. You get a plain-English explanation before we repair it.
Ice Maker Control Board RepairOur Manitowoc cuber died on a Friday night before a wedding reception. IceTech came out within two hours, swapped the water inlet valve and had us making ice again. Saved the event. These guys know commercial machines.
The ice maker in our Sub-Zero stopped making ice and started leaking. The tech found a cracked fill tube and a bad thermostat. He had both on the truck. Done in 90 minutes. Fair price, no upsell.
I called three places and IceTech was the only one that could come the same day. My LG fridge ice maker was making a grinding noise. Turned out to be an auger jam. Fixed it and showed me how to avoid it.
Good service overall. The tech diagnosed a faulty control board on our Scotsman and ordered the part. Took two days to get it, but he kept us updated and the repair has held up fine.
Our restaurant goes through a lot of ice. IceTech set us up on a maintenance schedule and now we rarely have breakdowns. They clean the condenser and descale the machine twice a year. Worth every penny.
The dispenser on our KitchenAid stopped working. Tech found a jammed auger and a worn switch. He cleared it, replaced the switch and tested everything. Polite, clean, and explained what went wrong.
We cover every neighborhood from the beach to the interstate. Whether you are in a high-rise on Gulf Shore Boulevard or a restaurant in East Naples, our techs know the area and the water.
View all service areas
Outside these areas? Get in touch and ask about your location.
These are the questions we hear most from homeowners and business owners in Collier County. If yours is not here, call us.
Describe what you are seeing and we will point you to the right next step.
+12393129157Most repairs run $129 to $449 depending on the part. A diagnostic and tune-up is $129 flat. Water inlet valve or thermostat replacements fall in the $249-$449 range. Compressor repairs run $549-$899. We give you a written estimate before any work starts.
Look for a shop that stocks parts, holds EPA Section 608 certification and has a Florida state appliance repair license. We meet all three. Our techs carry valves, boards and thermostats for Whirlpool, GE, Samsung, LG, Scotsman and Manitowoc, so most repairs finish in one visit.
Yes. We offer emergency ice maker repair Naples FL 24/7 for commercial clients and after-hours residential calls. If your restaurant cuber goes down during service, call +12393129157 and we will dispatch the closest tech. Same-day service is available for most calls placed before noon.
Ask three things: do they carry parts on the truck, do they hold EPA 608 certification, and do they give a written estimate before starting. A tech who has to order every part will leave your machine down for days. We stock the common failure parts for the brands we service.
Yes, most calls placed before noon get a same-day visit. We serve all of Collier County, including Downtown Naples, North Naples, East Naples and Vanderbilt Beach. If you need same day ice maker repair Naples FL, call and we will schedule you in.
Call +12393129157 and we will route the closest tech. Same-day service across Collier County, with parts on the truck for most brands. No ice, no problem.
Call +12393129157 or email info@icetechrepairexperts.com to book your ice maker repair. Our dispatch team answers calls from 8 a.m. to 6 p.m. Monday through Friday, and we offer 24/7 emergency service for commercial clients. Tell us your brand, symptom and ZIP code, and we will give you a realistic arrival window.